Sincere core manufacturing innovation lasting
International Business: 0871-67334199
Sales Tel: 0871-67388840
Home
About Us
Company Profile
Meet the Founder
Strength
Cooperative Brand
Honorary Patent
Quality Certification
Production workshop
Product System
Engineering case
Enterprise culture
Development process
Team style
Party Building
Brief Introduction of Party Branch
Party branch members
Party branch style
Blog
Company News
Industry News
Cable knowledge
Related Technical Information
Join Kunbao
Talent strategy
Contact Us
Online message
Company Blog
Industry Blog
2013-04-14
Before cutting the joint, check whether there is water and moisture in the joint. If there is, the joint cannot be cut with a blowtorch, because the heating of the blowtorch causes moisture to rush to the inside of the cable from both sides of the joint. It is better to cut the sleeve with a hammer and a cutter. If there is no moisture and moisture, the lead sleeve can be ironed with a blowtorch to remove the lead sleeve dirt, scrape off the rust spots, scum and remove the solder slag, for reuse. Moisture can be removed by baking. It is baked with a blowtorch or charcoal fire to drive away moisture. This method can only be used with a small amount of moisture. When the paper insulated core wire is seriously damp, the wax pouring method can be used to remove moisture with hot wax.
View Details
2013-04-19
1. Halogen flame retardant: This is the most commonly used flame retardant at present. Its flame retardant principle is that halogen-containing flame retardant generates halogen-hydrogen acid when exposed to fire. This is a non-combustible gas with a large proportion. Around the burning material, it plays a role in isolating oxygen; in addition, halogen flame retardants also have the effect of capturing OH roots. 2. Phosphorus (boron)-containing flame retardant: Phosphorus (boron)-containing flame retardant mainly forms a non-combustible liquid film of phosphorus (boron) acid during combustion, and its boiling point can reach 300°C; At the same time, phosphoric acid further generates metaphosphoric acid, which is a very stable solid-phase polymer, covering the combustible, and covering the liquid phase and solid phase.
2017-06-02
2013-01-16