Power cable crimping process - quality inspection after crimping
1) The surface of the crimping part should be smooth, and there should be no cracks and burrs. There should be no sharp points at all edges.
2) The depth of the pit pressure should be the same as the height of the pressing part of the male die, and the bottom of the pit should be flat and undamaged.
3) The electrical and mechanical properties of the crimp joint shall comply with the provisions of GB/T9327-1988 "Test method for cable conductor compression and mechanical connection joints".
Kunming Kunbao Wire and Cable Manufacturing Co., Ltd.
The company mainly produces bare wires, wires and cables for electrical equipment, power cables, data signal cables and special cables, with more than 1,800 varieties and specifications.
Marketing Tel: 0871-67388840 67388841
Contact: Ms. Liu 18213841134 Mr. Yang 18468235195
Marketing Headquarters: 11th Floor, Block D, Yinhai Sakura Language Happiness Plaza, Guandu District, Kunming City
Production Base: Xiaoshaoqing Area, Qidian Industrial Park, Chenggong District, Kunming City, Yunnan Province
Tel: 0871-67333199 Fax: 0871-67334199
© COPYRIGHT 2022 Kunming Kunbao Wire and Cable Manufacturing Co., Ltd. ALL RIGHTS RESERVED | SEO
Technical support: www.300.cn Kunming